Table 6-42. SNMP User CLI Commands
CLI Command
snmp-server user
username groupname
[remote engineid-
strin g][auth-md5
password | auth-sha
password | auth-md5-
key md5-des-key |
auth-sha-key sha-des-
key ]
show snmp users
[ username ]
Console (config)# snmp-server user John auth-md5 1234
Console (config)# end
Console (config)# show snmp users
Name
Group Name
-------
----------
John
user-group
Defining Communities
Access rights are managed by defining communities on the SNMPv1, 2 Community page. When
the community names are changed, access rights are also changed. SNMP Comminutes are defined
only for SNMP v1 and SNMP v2.
To open the SNMPv1, 2 Community page, click System→ SNMP→ Communities in the tree view.
Description
Configures a new SNMP V3 user.
Displays the configuration of users.
Auth Method
-----------
md5
Remote
------
Configuring System Information
211