Dell PowerConnect 6024 User Manual page 144

Figure 6-32. Add Host Name Mapping
3
Define the relevant fields.
4
Click Apply Changes.
The IP address is mapped to the host name, and the device is updated.
Displaying the Host Names Mapping Table
1
Open the Host Name Mapping page.
2
Click Show All.
The Host Name Mapping Table opens:
Figure 6-33. Host Name Mapping Table
Removing a Host Name from IP Address Mapping
1
Open the Host Name Mapping page.
2
Click Show All.
The Host Name Mapping Table opens.
3
Select a Host Name Mapping Table entry.
4
Check the Remove check box.
5
Click Apply Changes.
The Host Name Mapping Table entry is deleted, and the device is updated.
Mapping an IP Address to Domain Host Names Using the CLI Commands
The following table summarizes the equivalent CLI commands for mapping domain host names to
IP addresses.
154
Configuring System Information