Dell PowerConnect 6024 User Manual page 362

Max Query Response Time (0-25) — Maximum response time for advertising IGMP queries.
Response time adjusts the amount of traffic on a per sub-network basis. Varying the response time
affects the burst of network traffic. The higher the value the longer period of time passes between
host responses. The default value is 10 seconds.
Last Member Query Interval (0-25)—Modifies the leave latency of the network. A reduced value
reduces the amount of time needed to detect the loss of the last group member. The default value
is 0.1.
Remove — When checked, removes the IGMP interface.
Adding an IGMP Interface
1
Open the IGMP Interface Parameters page.
2
Click Add to display the Add an IGMP Interface page.
3
Select an interface from the New Interface drop down menu.
4
Complete the fields on the page.
5
Click Apply Changes.
The new IGMP Interface is added to the device.
Modifying an IGMP Interface
1
Open the IGMP Interface Parameters page.
2
Select the interface that you want to modify.
3
Modify the desired fields.
4
Click Apply Changes.
The IGMP Interface parameters are modified and saved to the device.
Deleting an IGMP Interface
1
Open the IGMP Interface Parameters page.
2
Click Show All to display the IGMP Interface Table page.
3
Select an IGMP interface, and check the Remove check box.
4
Click Apply Changes.
The IGMP interface is removed.
Configuring IGMP Interface Parameters Using CLI Commands
The following table contains the CLI commands for configuring IGMP interface parameters.
372
Configuring Routing