Configuring Basic Qos Mode - Dell PowerConnect 6024 User Manual

Removing UDP to Queue Mapping
1
Open the UDP to Queue page.
2
Click Show All to display the UDP to Queue Mapping Table page.
3
Click Remove for each of the UDP ports for which queue mapping should be removed.
4
Click Apply Changes.
Defining UDP to Queue Mapping Using the CLI Commands
Table 10-8. UDP to Queue Mapping CLI Commands
CLI Command
qos map udp-port-queue
port1 ... port 8 to queue-
id
show qos map [dscp-queue |
tcp-port-queue | udp-port-
queue | dscp-policed |
dscp-mutation]
The following is an example of the CLI commands:
console(config)# qos map udp-port-queue 68 to 1
console(config)# exit
console# show qos map udp-port-queue
Udp port-queue map:
Port queue
----- -----
8000 1
8001 2

Configuring Basic QoS Mode

The Basic QoS Mode page contains links to QoS pages on which Trust Mode and DSCP Rewriting
are configured. To open the Basic QoS Mode page, click Quality of Service→ Basic QoS Mode in
the tree view.
Description
Modifies the UDP-Port to
queue.
Displays all the QoS maps.
Configuring Quality of Service
445