Figure 6-36. Add ARP Entry Page
3
Select an interface and complete the fields in the page.
4
Click Apply Changes.
The ARP Table static entry is added, and the device is updated.
Modifying an ARP Table Entry
1
Open the ARP Settings page.
2
Select a table entry.
3
Modify the required fields for a given interface.
4
Click Apply Changes.
The ARP Table static entry is modified, and the device is updated.
Deleting an ARP Table Entry
1
Open the ARP Settings page.
2
Click Show All to display the ARP Table page.
3
Select a table entry.
4
Check Remove.
5
Click Apply Changes.
The table entry is deleted, and the device is updated.
Configuring System Information
159