Dell PowerConnect 6024 User Manual page 443

Figure 10-14. QoS Class Map Page
Class-Map Name — The user-defined name of the class map.
IP ACL — The IP ACL from the IP Access Control List (ACL). For more information about
defining IP-based ACLs, see "Defining IP based ACLs."
Match — Criteria used to match IP addresses and /or MAC addresses with an ACL's address.
Possible values are:
And — Both the MAC-based and the IP-based ACL must match a packet.
Or — Either the MAC-based or the IP-based ACL must match a packet.
MAC ACL — The MAC ACL from the MAC Access Control List. For information about defining
MAC-based ACLs, see "Defining MAC based ACLs."
Remove — When checked, removes the class map from the Class Map Table.
Adding a Class Map
1
Open the QoS Class Map page.
2
Click Add to display the Add a Class-Map page.
3
Enter a name (16 characters maximum) for the class map in the Class-Map Name field.
4
Do one of the following.
• To attach an IP ACL to the class map, check IP ACL and select an IP ACL from the
drop-down menu.
• To attach a MAC ACL to the class map, check MAC ACL and select a MAC ACL from
the drop-down menu.
Configuring Quality of Service
453