Defining SNTP Authentication Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
SNTP Authentication page.
Table 6-6. SNTP Authentication CLI Commands
CLI Command
sntp authenticate
sntp authentication-
key number md5 value
sntp trusted-key
key-number
show sntp
configuration
The following is an example of the CLI commands:
Console(config)# sntp authentication-key 8 md5 ClkKey
Console(config)# sntp trusted-key 8
Console(config)# sntp authenticate
Defining SNTP Servers
The SNTP Servers page contains information for enabling SNTP servers, as well as adding new
SNTP servers.
To open the SNTP Servers page, click System → SNTP → Servers in the tree view.
116
Configuring System Information
Description
Set to require authentication for received Network
Time Protocol (NTP) traffic from servers.
Defines an authentication key for SNTP .
Defines the authentication key used to
authenticate the SNTP server.
Displays the SNTP configuration.