Defining Dscp To Queue Mapping - Dell PowerConnect 6024 User Manual

6 : 60 61 62 63

Defining DSCP to Queue Mapping

The DSCP to Queue Mapping page enables mapping DSCP values to specific queues. To open
the page, click Quality of Service→ QoS Global Parameters→ DSCP to Queue in the tree view.
Figure 10-7. DSCP to Queue Mapping Page
DSCP In — Indicates the Differentiated Services Code Point value in the incoming packet
Queue — Maps the DSCP value to the selected queue.
Incoming packets with the specified DSCP value are mapped to the designated queue, if Trust
mode is enabled for DSCP. The DSCP values 3, 11, 19, 27, 35, 43, 51, and 59 are mapped to q1, q2
... q8. These settings cannot be changed.
Mapping DSCP to Queues
1
Open the DSCP to Queue Mapping page.
2
Select a queue for each DSCP level.
3
Click Apply Changes.
DSCP is mapped to queues, and the device is updated.
440
Configuring Quality of Service