Dell PowerConnect 6024 User Manual page 264

Entries can be queried by Port, MAC Address, or VLAN ID.
3
Click Query.
The Dynamic Address Table is queried.
Sorting the Dynamic Address Table
1
Open the Dynamic Address Table page.
2
From the Address Table Sort Key drop-down menu, select whether to sort addresses by
address, VLAN ID, or interface.
3
Click Query.
The Dynamic Address Table is sorted.
Current Address Table
The Current Address Table contains dynamic address parameters by which packets are directly
forwarded to the ports. The Current Address Table contains the following fields:
• VLAN ID — Indicates the VLAN Tag value.
• MAC — Indicates the MAC address.
• Port — Indicates the port number.
Querying and Sorting Dynamic Addresses Using CLI Commands
The following table summarizes the equivalent CLI commands for querying and sorting dynamic
addresses as displayed in the Dynamic Address Table.
Table 7-13. Query and Sort CLI Commands
CLI Command
bridge aging-time seconds Sets the address table aging time.
show bridge address-table
[vlan vlan] [ethernet
interface | port-channel
port-channel-number ]
The following is an example of the CLI commands:
Console (config)# bridge aging-time 300
Console (config)# exit
Console# show bridge address-table
Aging time is 300 sec
274
Configuring Switch Information
Description
Displays classes of dynamically created
entries in the bridge-forwarding database.