Dvmrp Prune Table - Dell PowerConnect 6024 User Manual

The following is an example of the CLI command:
Console (config-if)# interface ethernet g5
Console (config-if)# ip dvmrp
Console (config-if)# ip dvmrp metric 15
Console (config-if)# exit
Console (config)# exit
Console> show ip dvmrp interface
Multicast routing enabled.
Multicast routing protocol is DVMRP.
Interface IP address Metric RCV Bad RCV Bad Sent PacketsRoutesRoutes
----------------------------------------------
eth g1 172.16.1.1 10012

DVMRP Prune Table

The DVMRP Prune Table page lists the routers upstream prune state. To open the DVMRP Prune
Table page, click Router→ IP Multicast→ DVMRP Prune Table in the tree view.
Figure 8-24. DVMRP Prune Table
Group IP Address — IP address of the prune group.
Source IP Address — Source IP address to be pruned.
Source Mask — Source IP mask that has been pruned.
Expiry Time — The remaining time before the upstream flow is pruned.
380
Configuring Routing