Dell PowerConnect 6024 User Manual page 317

Figure 7-40. IGMP Snooping
VLAN ID — Specifies the VLAN ID.
IGMP Snooping Status — Enables or disables IGMP snooping on the VLAN.
Auto Learn — Enables or disables Auto Learn on the device.
Host Timeout (1-2147483647) — Time before an IGMP snooping entry is aged out. The default
time is 260 seconds.
Multicast Router Timeout (1-2147483647) — Time before aging out a Multicast router entry. The
default value is 300 seconds.
Leave Timeout (0-2147483647) — Time, in seconds, after a port leave message is received before
the entry is aged out. User-defined enables you to set the timeout period, and Immediate Leave
specifies an immediate timeout period. The default timeout is 10 seconds.
Enabling IGMP Snooping on the Device
1
Open the IGMP Snooping page.
2
Select the VLAN ID for the device on which you want to enable IGMP snooping.
3
Select Enable in the IGMP Snooping Status field.
4
Complete the fields on the page.
5
Click Apply Changes.
IGMP snooping is enabled on the device.
Displaying the IGMP Snooping Table
1
Open the IGMP Snooping page.
Configuring Switch Information
327