Dell PowerConnect 6024 User Manual page 292

Table 7-24. VLAN Port CLI Commands
CLI Command
switchport mode {
access | trunk |
general}
switchport trunk
native vlan vlan-id
switchport general
pvid vlan-id
switchport general
allowed vlan add vlan-
list [ tagged |
untagged]
switchport general
acceptable-packet-
types tagged-only
switchport general
ingress-filtering
disable
shutdown
set interface active
{ethernet interface |
port-channel port-
channel-number }
The following is an example of the CLI commands:
Console (config)# interface ethernet g8
Console (config-if)# switchport mode access
console (config-if)# switchport trunk native vlan 123
Console (config-if)# switchport general pvid 234
Console (config-if)# switchport general allowed vlan add 1,2,5,6
tagged
Console (config-if)# switchport general acceptable-packet-types
tagged-only
302
Configuring Switch Information
Description
Configures a port VLAN membership mode.
Defines the port as a member of the specified
VLAN, and the VLAN ID as the "port default
VLAN ID (PVID)".
Configure the Port VLAN ID (PVID) when the
interface is in general mode.
Adds or removes VLANs from a general port.
Discards untagged packets at ingress.
Disables port ingress filtering.
Disables interfaces.
Reactivates an interface that is shutdown due
to security reasons.