Enabling ARP Proxy
Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical
addresses. The ARP Proxy page allows network managers to enable ARP Proxy on the switch.
To open the ARP Proxy page, click System→ IP Addressing→ ARP Proxy in the tree view.
Figure 6-34. ARP Proxy
The ARP Proxy field enables the device to respond to ARP requests for located nodes. If disabled,
the device responds with its own MAC address
Enabling ARP
1
Open the ARP Proxy page.
2
Select Enabled in the ARP Proxy field.
3
Click Apply Changes.
The ARP Proxy is enabled on the device.
156
Configuring System Information