Dell PowerConnect 6024 User Manual page 396

Current No. of Samples in List — Indicates the current number of samples taken.
Sampling Interval (1-3600) —Indicates in seconds the time that samplings are taken from the
ports. The possible values are 1-3600 seconds. The default is 1800 seconds (30 minutes).
Remove — When checked, removes the RMON History Control Table entry.
Adding a History Control Entry
1
Open the RMON History Control page.
2
Click Add to display the Add History Entry page.
3
Complete the fields in the dialog and click Apply Changes.
The entry is added to the RMON History Control Table.
Modifying a RMON History Control Table Entry
1
Open the RMON History Control page.
2
Select an entry in the History Entry No. field.
3
Modify the fields as desired and click Apply Changes.
The table entry is modified, and the device is updated.
Deleting a History Control Table Entry
1
Open the RMON History Control page.
2
Select an entry in the History Entry No. field.
3
Click Remove and then click Apply Changes.
The table entry is deleted, and the device is updated.
Viewing RMON History Control Using the CLI Commands
The following table contains the CLI commands for viewing GVRP statistics.
Table 9-5. RMON History CLI Commands
CLI Command
rmon collection history
index [owner ownername |
buckets bucket-number ]
[interval seconds ]
show rmon collection
history [ethernet
interface | port-channel
port-channel-number ]
The following is an example of the CLI commands:
406
Viewing Statistics
Description
Enables and configures RMON on an
interface.
Displays RMON collection history
statistics.