Displaying the Port Table
1
Open the Port Configuration page.
2
Click Show All to display the Port Configuration Table.
Configuring Ports with CLI Commands
The following table summarizes the equivalent CLI commands for configuring ports as displayed
in the Port Configuration page.
Table 7-8. Port Configuration CLI Commands
CLI Command
interface ethernet
interface
description string
shutdown
set interface active
{ethernet interface | port-
channel port-channel-
number }
speed {10 | 100 | 1000}
duplex {half | full}
negotiation
back-pressure
flowcontrol {auto | on |
off}
mdix {on | auto}
Description
Enters the interface configuration
mode to configure an ethernet type
interface.
Adds a description to an interface
configuration.
Disables interfaces that are part of the
currently set context.
Reactivates an interface that is
shutdown due to security reasons.
Configures the speed of a given
ethernet interface when not using auto
negotiation.
Configures the full/half duplex
operation of a given ethernet interface
when not using auto negotiation.
Enables auto negotiation operation for
the speed and duplex parameters of a
given interface.
Enables Back Pressure on a given
interface.
Configures the Flow Control on a
given interface.
Enables automatic crossover on a
given interface or Port-channel.
Configuring Switch Information
259