Dell PowerConnect 6024 User Manual page 221

The General Settings page contains the following fields:
Current — Maximum number of entries.
After Reset— Maximum number of entries after the device is reset. By entering a value in this
column, memory is allocated to the field table.
Max RAM Log Entries (20-400) — Maximum number of RAM Log table entries. The default
value is 200 entries.
Jumbo Frames — Enables the transportation of identical data in fewer frames. This ensures less
overhead, lower processing time, and fewer interrupts. Internal frames may be effected by enabling
Jumbo frames.
Enabling Jumbo Packets
1
Open the General Settings page.
2
Select Enabled in the Jumbo packets field.
3
Click Apply Changes.
Jumbo packets are enabled on the device.
Viewing General Settings Using the CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the
General Settings page.
Table 6-49. General Settings CLI Commands
CLI Command
logging buffered
size number
port jumbo-frame
The following is an example of the CLI commands:
Console (config)# logging buffered size 300
Console (config)#port jumbo-frame
Description
Sets the number of syslog messages stored in
the internal buffer (RAM).
Enables jumbo packets for the device.
Configuring System Information
231