Table of Contents
Advertisement
The following section contains instruction for connecting the PowerConnect 3324/3348 to a AC power connection. The PowerConnect 3324/3348 is supplied
with power from:
AC power supply source.
l
An optional PowerConnect RPS-600 redundant power supply.
l
Both AC and DC sources.
l
Connecting PowerConnect 3324/3348 to a Power Supply
Plug in the PowerConnect 3324/3348 to one of the previously listed power sources.
l
AC Power Connection
AC power should be supplied to the unit through a 1.5m (5 foot) standard power cable with safety-ground connected.
To connect power to PowerConnect 3324/3348:
1. Connect the power cable to the AC main socket located on the rear panel. If there is a redundant power module, connect this redundant power module
cable to a separate power supply.
2. Connect the power cable to a grounded AC outlet.
3. Confirm that the device is connected and operating correctly by examining the LEDs on the front panel. For more information about LEDs, see
Definitions".
Cable, Port, and Pinout Information
"LED
Advertisement
Table of Contents
