Name: Region1
Revision: 1
Instance
Vlans Mapped
--------
------------
0
1-9,31-4094
1
10-20
2
21-30
Defining MSTP Interface Settings
Use the MSTP Interface Setting page to assign MSTP settings to specific interfaces.
To open the MSTP Interface Setting page, click Switch → Spanning Tree → MSTP Interface
Setting in the tree view.
Figure 7-26. MSTP Interface Setting
The MSTP Interface Setting page contains the following parameters:
Instance ID — Lists the MSTP instances configured on the device. Possible field range is 0-15.
Interface — Assigns either ports or LAGs to the selected MSTP instance.
Port State— Indicates whether the port is enabled or disabled in the specific instance.
Configuring Switch Information
293