Table 6-48. Copy File CLI Commands
CLI Command
copy source-url destination-url
delete startup-config
The following is an example of the CLI commands:
Console# delete startup-config
Defining Advanced Settings
Use Advanced Settings to set miscellaneous global attributes of the device. The changes to these
attributes are applied only after the device is reset. Click System→ Advanced Settings in the tree
view to open the Advanced Settings page.
The the Advanced Settings page contains a link for configuring general settings.
Configuring General Settings
Use the General Settings page to define general device parameters.
To open the General Settings page, click System > Advanced Settings > General in the tree view.
Figure 6-73. General Settings
230
Configuring System Information
Description
Copies any file from a source to a destination.
Deletes the startup configuration file.