Defining Qos Tcp To Queue Mapping - Dell PowerConnect 6024 User Manual

Mapping DSCP to Queues Using the CLI Commands
Table 10-6. DSCP to Queue CLI Commands
CLI Command
qos map dscp-queue dscp-
list to queue-id
show qos map [dscp-queue
| tcp-port-queue | udp-
port-queue | dscp-
policed | dscp-mutation]
The following is an example of the CLI commands:
console(config)# qos map dscp-queue 33 40 41 to 1
console (config) # exit
console # show qos map dscp-queue
Dscp-queue Map
d1: d2 0 1 2 3 4 5 6 7 8 9
----------------------------
0: 01 01 01 01 01 01 02 02
1: 02 02 02 02 02 03 03 03
2: 03 03 03 04 04 04 04 04
3: 04 04 05 05 05 05 05 05
4: 06 06 06 06 06 06 07 07
5: 07 07 07 07 08 08 08 08
6: 08 08 08 08

Defining QoS TCP to Queue Mapping

The QoS TCP to Queue page enables mapping a TCP port to a queue. To open the page, click
Quality of Service→ QoS Global Parameters→ TCP to Queue in the tree view.
Description
Modifies the DSCP to CoS map.
Displays all the QoS maps.
Configuring Quality of Service
441