Defining Snmp Access Control - Dell PowerConnect 6024 User Manual

Defining SNMP Access Control

The Access Control Group page provides information for creating SNMP groups, and assigning
SNMP access privileges. Groups allow network managers to assign access rights to specific device
features or features aspects.
The Out-of-Band port is treated as a separate device when using SNMP features. Views can be
limited to Out-of-Band MIBs, device MIBs or to all MIBs.
To open the Access Control Group page, click System → SNMP → Access Control in the tree view.
Figure 6-56. Access Control Group
The Access Control Group page contains the following fields:
Group Name — Contains a list of user-defined groups to which access control rules are applied. A
group name can contain a maximum of 30 alphanumeric characters.
Security Model — Defines the SNMP version attached to the group. The possible field values are:
SNMPv1 — SNMPv1 is defined for the group.
SNMPv2 — SNMPv2 is defined for the group.
SNMPv3 — SNMPv3 is defined for the group.
Security Level — The security level attached to the group. Security levels apply to SNMPv3 groups
only. The possible field values are:
No Authentication — Neither Authentication nor Privacy security levels are assigned to the
group.
204
Configuring System Information