Configuring Dvmrp Interfaces - Dell PowerConnect 6024 User Manual

The following is an example of CLI commands:
Console> show ip igmp groups
Group Address
------------------------------------------------------
239.255.255.254 eth g11w0d00:02:19
224.0.1.40
224.0.1.40
224.0.1.1
224.9.9.2
232.1.1.1

Configuring DVMRP Interfaces

Distance Vector Multicast Routing Protocol (DVMRP) uses the Reverse Path Forwarding (RPF)
Multicast algorithm to create source based multicast delivery trees. DVMRP is an RPF checking
protocol based on DVMRP Routing information. The routing information is collected during
routing the exchange.
The DVMRP Interface page contains information about DVMRP interface configurations.
To open the DVMRP Interface page, click Router→ IP Multicast→ DVMRP Interface in the tree
view.
Interface Uptime Expires Last Reporter
eth g31w0d00:02:15
eth g31w0d00:02:1
eth g11w0d00:02:11
eth g11w0d00:02:17
eth g15d21h00:02:11
172.21.200.159
172.21.200.1
static
172.21.200.11
172.21.200.155
172.21.200.206
Configuring Routing
377