Table 7-32. IGMP Port/LAG Members Table Control Settings
Port Control
Definition
Blank
Indicates that the port is not attached to a
Multicast group.
Adding Bridge Multicast Addresses
1
Open the Bridge Multicast Group page.
2
Click Add to display the Add Bridge Multicast Group page.
Figure 7-38. Add Bridge Multicast Group Page
3
Define the VLAN ID and New Bridge Multicast Address fields.
4
Toggle a port to S to join the port to the selected multicast group.
5
Toggle a port to F to forbid adding specific multicast addresses to a specific port.
6
Click Apply Changes.
The bridge multicast address is assigned to the multicast group, and the device is updated.
Defining Ports to Receive Multicast Service
1
Open the Bridge Multicast Group page.
2
Define the VLAN ID and the Bridge Multicast Address fields.
3
Toggle a port to S to join the port to the selected multicast group.
4
Toggle a port to F to forbid adding specific multicast addresses to a specific port.
5
Click Apply Changes.
The port is assigned to the multicast group, and the device is updated.
Configuring Switch Information
321