Dell PowerConnect 6024 User Manual page 258

Figure 7-16. Port Mirroring
The Port Mirroring page contains the following fields:
Destination Port — Contains a list of port numbers from which port traffic may be copied.
Transmit Packets — Specifies if packets are transmitted tagged or untagged from the destination
port.
Source Port — Port number to which port traffic is mirrored.
Type — Specifies the type of traffic monitored. Possible field values are:
TX — Monitors transmitted packets only.
RX — Monitors received packets only.
TX and RX — Monitors transmitted and received packets.
Status — Indicates if the port is currently monitored (Active) or not monitored (Not Ready).
Remove — When checked, removes the port mirroring session.
Adding a Port Mirroring Session
1
Open the Port Mirroring page.
2
Click Add to display the Add Source Port page.
3
Select the source port from the Source Port drop-down menu.
268
Configuring Switch Information