Dell PowerConnect 6024 User Manual page 140

The Add DNS Server page contains the following fields:
DNS Server — Specifies the DNS server's IP address.
DNS Server Currently Active — Indicates the currently active DNS server.
Set DNS Server Active — Select the check box to define the DNS server as the active DNS
server.
3
Define the relevant fields.
4
Click Apply Changes.
The new DNS server is defined, and the device is updated.
Displaying the DNS Servers Table
1
Open the Domain Naming System (DNS) page.
2
Click Show All.
The DNS Server Table page opens:
Figure 6-29. DNS Server Table
Removing DNS Servers
1
Open the Domain Naming System (DNS) page.
2
Click Show All.
3
The DNS Server Table page opens.
4
Select a DNS Server Table entry.
5
Select the Remove check box.
6
Click Apply Changes.
The selected DNS server is deleted, and the device is updated.
150
Configuring System Information