Network Port Connector Pinout Information For A J-Ex4200 Switch; Console Port Connector Pinout Information For A J-Ex Series Switch - Dell PowerConnect J-EX4200 Hardware Manual

Dell PowerConnect J-Series J-EX4200 Ethernet Switch Hardware Guide

Network Port Connector Pinout Information for a J-EX4200 Switch

Table 15: Network Port Connector Pinout Information for a J-EX4200 Switch
Pin
1
2
3
4
5
6
7
8
Related
Documentation

Console Port Connector Pinout Information for a J-EX Series Switch

30
A network port on a J-EX4200 switch uses an RJ-45 connector to connect to a device.
The port uses an autosensing RJ-45 connector to support a 10/100/1000Base-T
connection. Two LEDs on the port indicate link/activity on the port and the port status.
See "Network Port LEDs in J-EX4200 Switches" on page 18.
Table 15 on page 30 provides the pinout information for the RJ-45 connector. An RJ-45
cable, with a connector attached, is supplied with the switch.
Signal
TRP1+
TRP1-
TRP2+
TRP3+
TRP3-
TRP2-
TRP4+
TRP4-
Front Panel of a J-EX4200 Switch on page 6
The console port on a J-EX Series switch is an RS-232 serial interface that uses an RJ-45
connector to connect to a console management device. The default baud rate for the
console port is 9600 baud.
Table 16 on page 31 provides the pinout information for the RJ-45 console connector.
An RJ-45 cable and an RJ-45 to DB-9 serial port adapter are supplied with the switch.
Description
Transmit/receive data pair 1
Negative Vport (in PoE models)
Transmit/receive data pair 1
Negative Vport (in PoE models)
Transmit/receive data pair 2
Positive Vport (in PoE models)
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Positive Vport (in PoE models)
Transmit/receive data pair 4
Transmit/receive data pair 4