Authentication Notifications — Enables or disables the device sending SNMP traps when
authentication fails.
Enabling SNMP Notifications
1
Open the Global Parameters page.
2
Select Enable in the SNMP Notifications field.
3
Click Apply Changes.
SNMP notifications are enabled, and the device is updated.
Enabling Authentication Notifications
1
Open the Global Parameters page.
2
Select Enable in the Authentication Notifications field.
3
Click Apply Changes.
Authentication notifications are enabled, and the device is updated.
Enabling SNMP Notifications Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the
Global Parameters page.
Table 6-39. SNMP Notification CLI Commands
CLI Command
snmp-server engineID
local { engineid-string
| default}
snmp-server enable
traps
snmp-server trap
authentication
show snmp
Description
Specifies the SNMP engine ID on the local
device.
Enables the device to send Simple Network
Management Protocol traps.
Enables the device to send Simple Network
Management Protocol traps when
authentication fails.
Shows the current SNMP device configuration.
Configuring System Information
199