Dell PowerConnect 6024 User Manual page 108

Last Response — The last time a response was received from the SNTP server.
Offset — Timestamp difference between the device's local clock and the acquired time from the
SNTP server.
Delay — The amount of time it takes to reach the SNTP server.
Remove — Select the check box to remove a specific SNTP server from the SNTP Servers list.
Adding an SNTP Server
1
Open the SNTP Servers page.
2
Click Add.
The Add SNTP Server page opens:
Figure 6-12. Add SNTP Server
3
Define the fields.
4
Click Apply Changes.
The SNTP server is added, and the device is updated.
Displaying the SNTP Servers Table
1
Open the SNTP Servers page.
2
Click Show All.
The SNTP Servers Table page opens:
Figure 6-13. SNTP Servers Table
118
Configuring System Information