Defining Arp Settings - Dell PowerConnect 6024 User Manual

Enabling ARP Proxy Using CLI Commands
The following table contains the CLI commands for enabling the ARP Proxy.
Table 6-23. ARP Proxy CLI Commands
CLI Command
ip proxy-arp
no ip proxy-arp
The following is an example of the CLI commands:
Console (config)# ip proxy-arp

Defining ARP Settings

Use the ARP Settings page to define ARP parameters for an IP interface. The ARP table is used to
maintain a correlation between each MAC address and its corresponding IP address. The ARP table
can be filled in statically by the user. When a static ARP entry is defined, a permanent entry is put
in the table, which the system uses to translate IP addresses to MAC addresses.
To open the ARP Settings page, click System→ IP Addressing→ ARP in the tree view.
Figure 6-35. ARP Settings
Description
Enables ARP proxy
Disables ARP proxy
Configuring System Information
157