Dell PowerConnect 6024 User Manual page 242

Adding ACEs to a MAC based ACL
NOTE:
1
Open the Add ACE to MAC Based ACL page.
2
Select an ACL in the ACL Name field.
3
Define the New ACE Priority, Source and Destination MAC addresses, VLAN ID and
Action fields.
4
Click Apply Changes.
The ACE is assigned to the MAC-based ACL.
NOTE:
parameters.
Displaying ACL-Specific ACEs
1
Open the Add ACE to MAC Based ACL page.
2
Click Show All to display the ACEs Associated with MAC ACL page.
Removing ACLs
NOTE:
1
Select an ACL.
2
Open the Add ACE to MAC Based ACL page.
3
Click Show All to display the ACEs Associated with MAC ACL page.
4
Check the Remove ACL check box.
5
Click Apply Changes.
The MAC-based ACL is removed, and the device is updated.
Removing ACEs From an ACL
1
Select an ACL.
2
Open the Add ACE to MAC Based ACL page.
3
Click Show All to display the ACEs Associated with MAC ACL page.
4
Check the Remove ACE check box in the row of the ACE to be removed.
5
Click Apply Changes.
The MAC-based ACL is removed, and the device is updated.
Assigning MAC based ACEs to ACLs Using the CLI Commands
The following table summarizes the equivalent CLI commands for assigning MAC based ACEs to
ACLs as displayed in the Add ACE to MAC Based ACL page.
252
Configuring Switch Information
ACEs can be added only if the ACL is not bound to an interface.
To add more than one ACE to an existing ACL, click Apply Changes and fill in the new ACE's
ACLs can be removed only if they are not bound to an interface.