Dell PowerConnect 6024 User Manual page 294

Ingress Filtering — Enables or disables Ingress filtering by the LAG. Ingress filtering discards
packets where the VLAN tag does not match any LAG VLAN.
Assigning VLAG Settings
1
Open the VLAN LAG Settings page.
2
Select a LAG from the LAG drop-down menu and complete the fields on the page.
3
Click Apply Changes.
The VLAN LAG parameters are defined, and the device is updated.
Displaying the VLAN LAG Table
1
Open the VLAN LAG Settings page.
2
Click Show All to display the VLAN LAG Table.
Assigning LAGs to VLAN Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for assigning LAGs to VLAN
groups as displayed in the VLAN LAG Settings page.
Table 7-25. LAG VLAN Assignments CLI Commands
CLI Command
switchport mode
{access | trunk |
general}
switchport trunk
native vlan vlan-id
switchport general
pvid vlan-id
switchport general
allowed vlan add vlan-
list [tagged |
untagged]
switchport general
acceptable-frame-type
tagged-only
switchport general
ingress-filtering
disable
304
Configuring Switch Information
Description
Configures a port VLAN membership mode.
Defines the port as a member of the specified
VLAN, and the VLAN ID as the port default
VLAN ID (PVID).
Configure the Port VLAN ID (PVID) when the
interface is in general mode.
Adds or removes VLANs from a general port.
Discards untagged packets at ingress.
Disables port ingress filtering.