Dell PowerConnect 6024 User Manual page 120

The TACACS+ Table page opens.
3
Select a TACACS+ Table entry.
4
Select the Remove check box.
5
Click Apply Changes.
The TACACS+ server is removed, and the device is updated.
TACACS+ Servers Using CLI Commands
Defining
The following table summarizes the CLI commands for working with fields in the OOB
TACACS+ Settings page.
Table 6-12. Out-of-Band TACACS+ Settings CLI Commands
CLI Command
tacacs-server host {oob/ip-address |
hostname} [single-connection] [port
port-number] [timeout timeout] [key
key-string] [source source] [priority
priority]
no tacacs-server host {ip-address |
hostname}
tacacs-server key [ key-
string ]
no tacacs-server key
tacacs-server timeout
timeout
no tacacs-server timeout
tacacs-server source-ip
oob/ip-address
no tacacs-server source-ip
oob/ip-address
show tacacs [oob/ip-address]
130
Configuring System Information
Description
Specifies a TACACS+ server host.
Deletes a specified TACACS+ server host.
Specifies the authentication and encryption
key used for all TACAS communication
between the device and the TACACS+ server.
This key must match the encryption used on
the TACACS daemon. (Range:0-128
characters)
Returns to the default.
Specifies the timeout value in seconds.
(Range: 1-30)
Returns to the default.
Specifies the source IP address. (Range:
Valid IP address)
Returns to the default.
Displays configuration and statistics for a
TACACS+ server.