Defining Igmp Static Interface Groups - Dell PowerConnect 6024 User Manual

Defining IGMP Static Interface Groups

The IGMP Static Group Table enables static definition of IGMP groups on specific interfaces.
To open the IGMP Static Group Table page, click Router→ IP Multicast→ IGMP Static Group
Table in the tree view.
Figure 8-21. IGMP Static Group Table
Interface — Specifies the port, VLAN, or LAG to which the specific multicast group is assigned.
IP Multicast Group Address — IP Multicast group address that is assigned to a interface.
New IP Multicast Group Address — The new IP Multicast group address assigned to an interface.
Assigning an Interface to a Multicast Group
1
Open the IGMP Static Group Table.
2
Select an interface in the Interface field.
3
Select an IP Address in the Multicast Group Address field, or define a new multicast group
address in the New Multicast Group Address field.
4
Click Apply Changes.
Displaying the Static Interface Grouping Table
1
Open the IGMP Static Group Table.
2
Click Show All to display the Static Interface Grouping Table.
374
Configuring Routing