Modifying an SNTP Server
1
Open the SNTP Servers page.
2
Click Show All.
The SNTP Servers Table opens.
3
Select an SNTP Server entry.
4
Modify the relevant fields.
5
Click Apply Changes.
The SNTP server information is updated.
Deleting the SNTP Server
1
Open the SNTP Servers page.
2
Click Show All.
The SNTP Servers Table opens.
3
Select an SNTP Server entry.
4
Select the Remove check box.
5
Click Apply Changes.
The entry is removed, and the device is updated.
Defining SNTP Servers Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
SNTP Servers page.
Table 6-7. SNTP Authentication CLI Commands
CLI Command
sntp server { ip-
address | hostname }
[poll] [key keyid ]
no sntp server ip-
address
The following is an example of the CLI commands:
Console(config)# sntp server 100.1.1.1 poll key 10
Description
Defines an SNTP server that can be used for
synchronizing time information.
Removes a server from the list of SNTP servers.
Configuring System Information
119