Dell PowerConnect 6024 User Manual page 215

Active Image — Image file that is currently active.
Active Image After Reset — The image file that is active after the device is reset. Possible values
are as follows:
Image 1 — The Image 1 file is active after device is reset.
Image 2 — The Image 2 file is active after device is reset.
Configuration File TFTP Server IP Address — TFTP Server IP Address via which the
configuration files are downloaded.
Configuration File Source File Name — Configuration file to be downloaded.
Configuration File Destination — The destination file to which to the configuration files is
downloaded. Possible values are:
Running Configuration — Downloads the running configuration files.
Startup Configuration — Downloads the startup config files.
Backup Configuration — Downloads the backup config files.
Configuration Download via OOB—Downloads the Configuration file via the out-of-band
management port.
Downloading Files
1
Open the File Download From Server page.
2
Verify the IP address of the TFTP server and ensure that the software image or boot file to be
downloaded is available on the TFTP server.
3
Complete the TFTP Server IP Address, Source File Name (full path without TFTP server IP
address), and the Destination File (software image or boot) fields.
NOTE:
The image file image overwrites the non-active image. It is recommended to designate that the
non-active image will become the active image after reset, and then to reset the device following the
download.
4
Click Apply Changes.
The software is downloaded to the device.
Activating Image Files
1
Open the File Download From Server page.
2
Select the image to activate from the Active Image After Reset drop-down menu.
3
Click Apply Changes.
The image file is selected.
NOTE:
To activate the selected Image file, reset the device. For information about resetting the device,
see "Resetting the Device."
Configuring System Information
225