The page contains the following fields:
•
Interface — The IP Multicast Group address of which the port is a member.
•
IP Multicast Group — The IP multicast group to which this interface is a member.
•
Group Up Time — Indicates in ticks the amount of time that has passed since the entry was
created. The time format is hour/minute/second.
•
Last Reporter — The last member to join the IP Multicast group. If no member has entered
the IP Multicast group, the value is 0.0.0.0.
•
Remove — When checked, removes an IGMP interface.
Configuring Static Interface Grouping Using CLI Commands
The following table contains the CLI commands for static interface grouping.
Table 8-17. Static Interface Grouping CLI Commands
CLI Command
ip igmp static-
group group-
address
The following is an example of the CLI commands:
Console (config)# interface ethernet g5
Console (config-if)# ip igmp static-group 192.168.4.1
Viewing the IGMP Dynamic Group Table
The IGMP Dynamic Group Table displays IGMP information regarding each IP Multicast group
whose members were dynamically assigned to an interface on a physical port.
To open the IGMP Dynamic Group Table, click Router→ IP Multicast→ IGMP Dynamic Group
Table in the tree view.
Description
Configures the router to be a statically connected member
of the specified group on the interface.
Configuring Routing
375