Defining Out-Of-Band Ip Interface Parameters - Dell PowerConnect 6024 User Manual

2
Define an IP address in the Default Gateway field.
3
Click Apply Changes.
The Out-of-Band Gateway device is defined, and the device is updated.
Table 6-10. Out-of-Band Default Gateway CLI Commands
CLI Command
ip default
gateway ip-
address
The following is an example of the CLI commands:
Console(config)# interface out-of-band-eth
Console(config-oob)# ip address 10.0.0.1 /8
Console(config-oob)# ip default-gateway 10.1.1.1

Defining Out-of-Band IP Interface Parameters

The OOB IP Interface Parameters page contains parameters for assigning Out-of-Band IP
addresses to interfaces.
To open the OOB IP Interface Parameters page, click System→ Out-of-Band Port→ IP Interface
Parameters in the tree view.
Description
Defines the Out-of-Band IP Gateway.
Configuring System Information
125