The LACP Parameters page contains sections for defining global parameters and port parameters.
LACP System Priority (1-65535) — Indicates the LACP priority value for global settings. The
default value is 1.
Select a Port — The port number to which timeout and priority values are assigned.
LACP Port Priority (1-65535) — LACP priority value for the port.
LACP Timeout — Administrative LACP timeout. Possible values are:
Short — Specifies a short timeout value.
Long — Specifies a long timeout value.
Defining Link Aggregation Global Parameters
1
Open the LACP Parameters page.
2
Complete the LACP System Priority and the LACP Timeout fields.
3
Click Apply Changes.
The parameters are defined, and the device is updated.
Defining Link Aggregation Port Parameters
1
Open the LACP Parameters page.
2
Scroll to the Port Parameters table.
3
Select the port for which you want to define parameters.
4
Define the LACP System Priority and the LACP Timeout fields.
5
Click Apply Changes.
The parameters are defined, and the device is updated.
Displaying the LACP Parameters Table
1
Open the LACP Parameters page.
2
Click Show All to display the LACP Parameters Table.
Configuring LACP Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring LACP parameters
as displayed in the Link Aggregation page.
Table 7-29. LACP Parameters CLI Commands
CLI Command
lacp system-priority
value
314
Configuring Switch Information
Description
Configures the system priority.