Dell PowerConnect 6024 User Manual page 335

Configuring Key Chains Using CLI Commands
The following table contains the CLI commands for configuring the key chains.
Table 8-5. Key Chain CLI Commands
CLI Command
key-chain name-
of-chain
key key-id
key-string text
accept-lifetime
start-time end-
time | {infinite
| start-time |
duration start-
time seconds } no
accept-lifetime
send-lifetime
start-time end-
time | {infinite
| start-time |
duration start-
time seconds }no
send-lifetime
show key-chains
[ name-of-chain ]
The following is an example of the CLI commands:
Console (config)# key chain M
Console (config-key-chain)# key 1
Console (config-key)# key-string mountain
Console (config-key)# accept-lifetime duration 13:30:00 Jan 25
2002 7200
Console (config-key)# send-lifetime duration 14:00:00 Jan 25 2002
3600
Console (config-key)# exit
Console (config)# exit
Console# show key-chains
Description
Identifies an authentication key group.
Identifies an authentication key on a key chain.
Specifies an authentication string for a key.
Sets the time period during which the authentication key
is valid for authenticating incoming packets.
Sets the time period during which an authentication key is
valid to generate an MD5 digest for outgoing packets.
Displays key chain information.
Configuring Routing
345