Dell PowerConnect 6024 User Manual page 132

Figure 6-23. Remote Log Server Settings
The Remote Log Server Settings page contains the following fields:
Available Servers — Servers to which logs can be sent.
UDP Port (1-65535) — The UDP port from which the logs are sent. The default value is 514.
Facility — A user-defined application from which system logs are sent to the remote server. Only
one facility can be assigned to a single server. If a second facility level is assigned, the first facility
level is overridden. All applications defined for a device use the same facility on a server. The
possible field values are Local 0 - Local 7.
Description—The server description. The maximum length is 64 characters.
Severity — The log severity. Selecting a severity level automatically selects all higher severity levels.
Delete Server — Deletes a server from the Available Server list. Checking the check box deletes
the server from the list. Leaving the box unchecked maintains the server in the list.
The Remote Log Server Settings page also contains a severity list. The severity definitions are the
same as the severity definitions on the RAM Log Table page.
Sending Logs to a Server
1
Open the Remote Log Server Settings page.
2
Define the UDP Port, Facility, and Description fields.
3
Select the log type and log severity by using the Log Parameters check boxes.
NOTE:
142
Configuring System Information
When you select a severity level, all higher severity levels are automatically selected.