Dell PowerConnect 6024 User Manual page 297

Figure 7-32. Protocol Port Page
Interface — Port or LAG number added to a protocol group.
Protocol Group ID — Protocol group ID to which the interface is added. Protocol group IDs are
defined in the Protocol Group Table.
VLAN ID — Attaches the interface to a user-defined VLAN ID. The VLAN ID is defined on the
Create a New VLAN page. Protocol ports can either be attached to a VLAN ID or a VLAN name.
VLAN Name — Attaches the interface to a user-defined VLAN name. The VLAN name is defined
on the Create a New VLAN page. This field is available only on the Add Protocol Port page.
Remove — When checked, removes the port assignment from a VLAN or protocol group.
Adding a New Protocol Port
1
Open the Protocol Port Table page.
2
Click Add to display the Add Protocol Port page.
3
Complete the fields in the dialog and click Apply Changes.
The new VLAN protocol group is added to the Protocol Port Table, and the device is updated.
Defining Protocol Ports Using CLI Commands
The following table contains the CLI commands for defining Protocol Ports.
Configuring Switch Information
307