Dell PowerConnect 6024 User Manual page 54

During boot, you can use the Startup menu, if necessary to run special procedures. To enter the
Startup menu, press <Esc> or <Enter> within the first two seconds after the auto-boot message
appears. For information on the Startup menu, see "Startup Menu Functions."
If you do not interrupt the system boot by pressing <Esc> or <Enter>, the system continues
operation by decompressing and loading the code into RAM. The code starts running from RAM
and the list of numbered system ports and their states (up or down) are displayed.
NOTE:
TThe following screen is an example configuration. Items such as addresses, versions, and dates
may differ for each device.
Preparing to decompress...
Decompressing SW from image-1
d04000
OK
Running from RAM...
**************************************************************
****
** Running
17:48:07 **
**************************************************************
****
HW version is 00.01.64
Base Mac address is: 00:00:b0:16:00:00
Dram size is
Dram first block size is
Dram first PTR is
Dram second block size is
Dram second PTR is
Flash size is: 16M
Tuning File info. Ver: 0.2.80 Creation date: Aug 20 2003
11:20:13
64
Configuring the Switch
SW Ver. 1.0.1.06
: 256M bytes
: 235520K bytes
: 0x1800000
: 1984K bytes
: 0xFE00000
Date 15-Sep-2003 Time