Dell PowerConnect 6024 User Manual page 421

4
Enter values for the interface's CIR and CBS.
5
Click Apply Changes.
The CIR and CBS for the selected interface are configured, and the device is updated.
Shaping Traffic on a Per Queue Basis
1
Open the Bandwidth Settings page.
2
Select an interface.
3
Check Shaping per Queue on Selected Port.
4
Enter CIR and CBS values for each queue.
5
Click Apply Changes.
The CIR and CBS for each queue on the selected interface are configured, and the device is
updated.
Configuring Queue Scheduling Settings Per Port
1
Open the Bandwidth Settings page.
NOTE:
Use the Global Queue Settings page to modify queue scheduling settings globally.
2
For each of the eight queues, configure the Strict Priority setting, or enter a Weight.
3
For each queue that has been set system-wide as a WRR queue, enter a weight.
The weight ratio determines the frequency by which the packet scheduler dequeues packets
from each queue. The ratio for each queue is defined by the queue weight divided by the sum
of all queue weights (normalized weight), thus setting the bandwidth allocation for each
queue.
4
Click Apply Changes.
The device is updated.
Displaying the Port Bandwidth Settings Table
1
Open the Bandwidth Settings page.
2
Click Show All to display the Port Bandwidth Settings Table page.
Configuring Quality of Service
431