Dell PowerConnect 6024 User Manual page 198

Figure 6-59. SNMPv3 User Security Model (USM)
The SNMPv3 User Security Model (USM) page contains the following fields:
Engine ID — Identifies the remote SNMPv3 enabled device to which the selected user is
connected.
Remote Engine ID — Indicates that the user is configured on a remote SNMPv3 enabled
device. If the engine ID is defined, remote devices receive inform messages.
User Name — Contains a list of user-defined user names.
Group Name — Contains a list of user-defined SNMP groups. SNMP groups are defined in the
Access Control Group page.
Authentication Method — Specifies the authentication method used to authenticate users. The
possible field values are:
None — No user authentication is used.
MD5 Password — Users are authenticated using the HMAC-MD5-96 authentication level.
The user should specify a password.
SHA Password — Users are authenticated using the HMAC-SHA-96 authentication level.
The user should enter a password.
MD5 Key — Users are authenticated using the HMAC-MD5-96 authentication level. The
user should enter authentication and privacy keys.
208
Configuring System Information