Dell PowerConnect 6024 User Manual page 209

SNMPv3 — SNMP version 3 is enabled for the selected recipient. The possible field values are:
User Name — Contains a list of users. Select one to generate notifications.
Security Level — The security level attached to notifications. The possible field values are:
No Authentication — The packet is neither authenticated nor encrypted.
Authentication — The packet is authenticated.
Privacy — The packet is both authenticated and encrypted.
UDP Port (1-65535) — UDP port used to send notifications. The default is 162.
Filter Name — Check this check box to apply a user-defined SNMP filter to notifications and
select an SNMP filter from the list.
Timeout (1-300) — Amount of time (seconds) the device waits before resending informs. The
default is 15 seconds.
Retries (1-255) — Maximum number of times the device resends an inform request. The default is
3.
Remove Notification Recipient — When checked, removes the selected notification recipient.
Adding a New Notification Recipient
1
Open the Notification Recipients page.
2
Click Add.
The Add Notification Recipient page opens:
Configuring System Information
219