Dell PowerConnect 6024 User Manual page 254

4
Click Apply Changes.
The LAG parameters are saved to the device.
Displaying the LAG Configuration Table
1
Open the LAG Configuration page.
2
Click Show All to display the LAG Configuration Table.
Configuring LAGs with CLI Commands
The following table summarizes the equivalent CLI commands for configuring LAGs as displayed
in the LAG Configuration page.
Table 7-9. LAG Configuration CLI Commands
CLI Command
interface port-channel
port-channel-number
channel-group port-
channel-number mode {on |
auto}
show interfaces port-
channel [ port-channel-
number ]
The following is an example of the CLI commands:
Console (config)# interface ethernet g5
Console (config-if)# channel-group 1 mode on
Console (config-if)# exit
Console# show interfaces port-channel
Channel Port
----------------------------------------------
Ch 1 Active
Ch 2 Active
Ch 3 Inactive g8
264
Configuring Switch Information
Description
Enters the interface configuration mode of a
specific port-channel.
Associates a port with a Port-channel.
Displays Port-channel information (which
ports are members of that port-channel, and
whether they are currently active or not).
g1, g2, g5 Inactive g3
g2