Figure 6-37. DHCP Relay
Enabling DHCP Relay
1
Open the DHCP Relay page.
2
Select Enable from the DHCP Relay drop-down menu.
3
Click Apply Changes.
The DHCP Relay entry is added to the DHCP Relay TTable.
Adding a DHCP Relay Entry
1
Open the DHCP Relay page.
2
Click Add to open the Add DHCP Server page.
3
Enter a value for New DHCP Server.
DHCP servers act as a DHCP relay if this parameter is not equal to 0.0.0.0. DHCP requests
are relayed only if their SEC field is greater or equal to the threshold value. This allows local
DHCP Servers to answer first.
4
Click Apply Changes.
The DHCP server is added to the DHCP Relay Table.
Configuring System Information
161