Click Router→ RIP→ Global Parameters in the tree view to display the RIP Global Parameters
page.
Figure 8-8. RIP Global Parameters Page
—
RIP Status
Enables or disables RIP on the device.
Redistribute OSPF Routes — When enabled, redistributes routes from OSPF to RIP.
Redistribution of routes involves importing foreign routing interfaces to RIP.
Redistribute Static Routes
Enabling RIP, Redistribution of OSPF Routes, Redistribution of Static Routes
1
Open the RIP Global Parameters page.
2
Select Enabled in the RIP global parameter field that you want to enable.
3
Click Apply Changes.
RIP is enabled on the device.
Configuring RIP Global Parameters Using CLI Commands
The following table contains the CLI commands for configuring the RIP global parameters.
Table 8-6. RIP Global Parameter CLI Commands
CLI Command
router rip enable
no router rip enable
—
When enabled, redistributes routes from static routes to RIP.
Description
Enables the Routing Information Protocol
(RIP) on the device.
Disables the Routing Information Protocol
(RIP) on the device.
Configuring Routing
347