Defining Ip Based Acls - Dell PowerConnect 6024 User Manual

Dell switch user manual
Hide thumbs Also See for PowerConnect 6024:
Table of Contents

Advertisement

The following is an example of the CLI commands:
Console(config)# interface ethernet g1
Console(config-if)# port security forward trap 100
Console(config-if)# exit
Console(config)# exit
Console# show ports security
Port
status
----
------
g1
Locked
g2
Unlocked
...
g24
Unlocked
ch1
Unlocked
...
ch7
Unlocked

Defining IP based ACLs

Access control lists (ACL) allow network managers to define classification actions and rules for
specific ingress ports. Your switch supports up to 1,024 ACLs. Packets entering an ingress port, with
an active ACL, are either admitted or denied entry and the ingress port is disabled. If they are
denied entry, the user can disable the port.
For example, a network administrator defines an ACL rule that says, port number 20 can receive
TCP packets, however, if a UDP packet is received, the packet is dropped.
ACLs are composed of access control entries (ACEs) that are made of the filters that determine
traffic classifications. The total number of ACEs that can be defined in all ACLs together is 1024.
Use the Add ACE to IP Based ACL page to define IP-based ACEs.
To open the Add ACE to IP Based ACL page, select Switch→ Network Security→ IP Based ACL.
Action
Trap
------
----
Forward
Enabled
-
-
-
-
-
-
-
-
Frequency
Counter
---------
-------
100
0
-
-
-
-
-
-
-
-
Configuring Switch Information
245

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect 6024f

Table of Contents