Viewing Dynamic Addresses - Dell PowerConnect 6024 User Manual

Table 7-12. Static Address CLI Commands
CLI Command
show bridge address-table
static [vlan vlan ]
[ethernet interface | port-
channel port-channel-
number ]
The following is an example of the CLI commands:
console (config)# interface vlan 1 console
(config-vlan)# bridge address 3aa2.64b3.a245 ethernet g8 permanent....
Console (config-vlan)# exit
Console (config)# exit
Console> show bridge address-table static
Aging time is 300 sec
Vlan
------ --------------------- ------ -------------------
1

Viewing Dynamic Addresses

The Dynamic Addresses Table contains fields for querying information in the dynamic address
table, including the interface type, MAC addresses, VLAN, and table sorting key. Packets forwarded
to an address stored in the address table are forwarded directly to those ports.
The Dynamic Address Table also contains information about the aging time before a dynamic
MAC address is removed from the table.
To open the Dynamic Address Table, click Switch→ Address Tables→ Dynamic Addresses Table in
the tree view.
272
Configuring Switch Information
Mac Address
3a:a2:64:b3:a2:45
Description
Displays statically created entries in the
bridge-forwarding database.
Port
g8 permanent
Type